All devices, used by our users to connect to eduroam, must be provided with wireless adapters, that support WPA-Enterprise or its successor WPA2-Enterprise security standard. After completing the setup, try connecting to your home organisation’s network first.
Eduroam Configuration Assistant Tool (CAT) provides an easy setup of eduroam profile for the following operating systems:
Installer from one organization will not work for users from other organizations, so be sure to use the installer for the organization that assigned you username. If your organization is not on the list, eduroam CAT can not be used. In this case, follow the procedure for manual configuration.
TIP: Before installing a new profile, remove any previously installed profiles for connecting to eduroam. Old profiles can in some cases cause malfunctions.
CAT is located on the website https://cat.eduroam.org/. Follow the hyperlink and then click the button eduroam user: download your eduroam installer.
Select your home organization in the highlighted window.
Afterwards you select a user group (if needed) and operating system for which you will download the installer.
Run the downloaded installer to finalize the procedure.
You can find detalied instructions on how to set up CAT on desktop/portable computers below:
Connection to the Eduroam network can only be successfully established if your mobile phone has support for Wi-Fi, WPA(2) security standard, wireless network standard 802.1X and Password Authentication Protocol (PAP).
Some mobile phones do not support certificate authentication that eduroam uses to authenticate device within the wireless network. Connecting to a network in such way is not safe as it is vulnerable to password sniffing. The following devices were tested and proved to be untrustworthy: